AT&T Models 1030/3070 with Feature Module 4 Manuale Utente Scaricare il pdf (Pagina 68)

ASSIGNING AN AUTOMATIC LINE SELECTION SEQUENCE

Automatic Line Selection is a

MERLIN

system feature that gives you a free line

whenever you pick up the handset. When a voice terminal is first installed, it

automatically selects lines in the order in which they appear on the voice terminal.

However, you can rearrange the Automatic Line Selection sequence, if necessary.

For each voice terminal, you can specify which line the system gives you first and,

if that line is busy, which line the system gives you second, and soon. A maximum

of eight lines may be included in an Automatic Line Selection sequence. Before

assigning an Automatic Line Selection sequence, please read the following

information.

●

When you program several features at once, Automatic Line Selection must be

the first feature you program. If the voice terminal is already in programming

mode, slide the T/P switch to the center position, and then back to P.

● If your system has Dial Access to Line Pools, any voice terminal with an

Automatic Tip/Ring Interface (ATRI), a Manual Tip/Ring Interface (MTRI), or a

General Purpose Adapter (GPA), must have a personal line or a button assigned

to a particular pool in order to originate a call from the device. This button should

be the first entry in the Automatic Line Selection sequence described below.

Do not place both intercom and outside lines in the Automatic Line Selection

sequence for any voice terminal.

If all the outside lines on a voice terminal are assigned to pool buttons, or if they

are assigned to separate buttons but are interchangeable with one another (for

example, all regular telephone company lines), you will probably prefer to pro-

gram this feature. But if a voice terminal has two or more different types of lines,

such as a line pool plus a private line or a WATS line, it may not be wise to pro-

gram the order for Automatic Line Selection. Users will probably prefer to select

the most appropriate line or line pool for the type of call, either themselves or

with Automatic Route Selection.

Use Centralized Voice Terminal Programming or follow the procedure below to assign

an Automatic Line Selection sequence.

Go to the voice terminal you want to program.

Slide the T/P switch on the left side of the voice terminal to P.

The voice terminal rings every 5 seconds to remind you it is in program

mode.

Dial **.

Touch the individual line and line pool buttons in the order you want

them to be selected.

If you have more options to program on this voice terminal, you can do

so. Otherwise, slide the T/P switch to the center position to return to nor-

mal operation.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 122 123

Commenti su questo manuale

Nessun commento

AT&T Models 1030/3070 with Feature Module 4 Manuale Utente Pagina 68

Commenti su questo manuale

Prodotti e manuali riguardandi Telefoni AT&T Models 1030/3070 with Feature Module 4